Contact UsMore >>
Taian Haishu Machinery Co.,Ltd.
contacts: lucy cai
Telephone:
+86-0538-8606979
E-mail:
tshaite@taianhaishu.com
Fax:
+86-0538-8606979
Home >>
HTS279-185/220/300 fuel injection pump test bench
Introduction
Use
1, debug, fuel injection pump of each cylinder fuel supply and fuel supply uniformity;
2 debugging injection pump oil supply starting point, oil interval angle;
3, the governor performance debugging;
4, injection pump tightness test;
5 the distributor pumps oil test;
6, assigned to the inspection of the pump pressure compensator;
7, the allocation of the pump cavity pressure measurement;
8, advance angle measurement (optional);
9, the gear lever stroke measurement (optional).
Characteristics
1. industrial computer;
2. LED digital display;
3. speed manual, automatic optional;
4. speed six-speed preset, arbitrary set;
5. the table for the wide-body T-slot;
6,.fuel cooling mode: air-cooled (standard), the compressor forced cooling (optional);
Technical parameters
Model |
HTS279-185 |
HTS279-220 |
HTS279-300 |
Spindle speed range |
0~3000 rpm |
0~3000 rpm |
0~3000 rpm |
injection pump cylinder |
12 |
12 |
12 |
spindle maximum output power |
18.5 KW |
22 KW |
30 KW |
Spindle center height |
125 mm |
125 mm |
125 mm |
Fuel system fuel supply |
≥8 L/min |
≥10 L/min |
≥12 L/min |
oil pressure |
Low≥0.4,High≥4.0 (MPa) |
Low≥0.4,High≥4.0 (MPa) |
Low≥0.4,High≥4.0 (MPa) |
Number of times |
0~1000 |
0~1000 |
0~1000 |
Fuel temperature |
40±2 ℃ |
40±2 ℃ |
40±2 ℃ |
Positive pressure |
0~0.16 MPa |
0~0.16 MPa |
0~0.16 MPa |
Negative pressure |
-0.1~0 MPa |
-0.1~0 MPa |
-0.1~0 MPa |
DC power |
12/24 V |
12/24 V |
12/24 V |
Back oil measurement |
6~60 L/h |
6~60 L/h |
6~60 L/h |
Dimensions |
2100×1100×1750 (L×W×H)mm |
2100×1100×1750 (L×W×H)mm |
2100×1100×1750 (L×W×H)mm |
Weight |
1100 Kg |
1300 Kg |
1500 Kg |